Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ...
KOCHEK- 4 KOCHEK- 4" Camlock Male x 3" NH Rigid Male-Aluminum

System Sensor Horn System Sensor 12 or 24VDC Horn Light Strobe

For horns, strobes and horn/strobes with hi-tech features, including easy installation, choose System Sensor®’s SPECTR ALERT ® ADVANCE SELECTABLE OUTPUT NOTIFICATION DEVICES. The plug-in design is simple to install. Just attach the universal mounting plate to a 4" junction box. Then connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the horn, strobe or horn/strobe to the mounting plate. The device will rotate into position and hold until it is secured with the capture mounting screw. That’s it! SpectrAlert Advance products work on 12 or 24 volts. The horn is rated at 88+ dB. The P2RHK120 model is UL listed for outdoor use, can operate in extreme temperatures (-40°F to 151°F) in either wet or dry conditions, and includes a weatherproof backbox. All SpectrAlert Advance sensors are electrically compatible with existing SpectrAlert products.
System Sensor P2R Horn Light Strobe System Sensor 12 or 24VDC Horn/Strobe (Selectable 15,15/75,30,75 or 110 Candela)

System Sensor 12 or 24VDC Weatherproof Horn/Strobe (Selectable 15,15/75,30,75 or 110 Candela)

For horns, strobes and horn/strobes with hi-tech features, including easy installation, choose System Sensor®’s SPECTR ALERT ® ADVANCE SELECTABLE OUTPUT NOTIFICATION DEVICES. The plug-in design is simple to install. Just attach the universal mounting plate to a 4" junction box. Then connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the horn, strobe or horn/strobe to the mounting plate. The device will rotate into position and hold until it is secured with the capture mounting screw. That’s it! SpectrAlert Advance products work on 12 or 24 volts. The horn is rated at 88+ dB. The P2RHK120 model is UL listed for outdoor use, can operate in extreme temperatures (-40°F to 151°F) in either wet or dry conditions, and includes a weatherproof backbox. All SpectrAlert Advance sensors are electrically compatible with existing SpectrAlert products.
Certified Safety Mfg.'s Water-Jel Burn Wrap in Canister

Water-Jel Fire Blankets consist of a scientifically formulated cooling gel and a special carrier. The 100% worsted wool blanket with intercellular weave is capable of absorbing up to 13 times its own weight. The blanket is soaked in a water- based / water-soluble, bacteriostatic & biodegradable gel.
Certified Safety Mfg.'s Unitized First Aid 36 Unit Kits with Poly White Kit Box

Construction Kits - Unitized First Aid 36 Unit Kits
Cato- Pull Station Cover w/ Pull-Down Cover, Recessed Mount

Cato PROTECTIVE COVERS are injection molded of high-density, red polyethylene for optimum impact and tensile strength. Breaker bar models feature a break glass panel and silk-screen messaging. The pull-down model features a molded, 1-piece copolymer cover and silk-screen messaging.
Polycarbonate Vandal Shield

Emergency Light Accessories
Brooks -  6 V, 2.5A Gates Style Lead Acid Battery 6 V, 2.5A Gates Style Lead Acid Battery

Gates-Style replacement sealed LEAD ACID BATTERIES are designed to be a direct substitute for Gates monobloc batteries of the same size, voltage and capacity.
Fire Blanket and Cabinet

FIBERGLASS BLANKET comes in a low profile, plastic CABINET complete with instruction labels and pull straps for quick withdrawal. Cabinet measures 14 1/4"H x 6 1/4"W x 1 1/2"D. Blanket measures 72"L x 48"W. NOTE: Single use only.
Fire Blanket Cabinet w/Blanket

ABS CABINET WITH WOOL BLANKET with brass lock and labels. Cabinet is made of high impact, flame-retardant ABS. Blankets are 80"L x 62"W and treated with Dupont® X-12 for fire retardancy. No dangerous glass to break, rustproof and theft-resistant. Red tub with clear cover.
SEVEN (7) TONE SIREN REMOTE CONTROL R&B Fabrications, Inc. - SEVEN (7) TONE SIREN REMOTE CONTROL

New York Fire Shield- Fire Retardant, 1 gal

FIRE RETARDANT by N.Y. Fire Shield is a Class A fire retardant for fibers, lumber and wood materials. Pre-mixed, easy to apply, non-toxic, non-allergenic, colorless, odorless (when dried), durable and UV stable. UL classified and approved by the CA State Fire Marshal. Works by slowing horizontal and vertical flame spread. Does not prevent charring, but treated items will not support ignition. Directions are included. Not recommended for outdoor use.
Brooks -  Multi-Mounting Kit for DDPBEAM1224/S  Multi-Mounting Kit for DDPBEAM1224/S

PROJECTED BEAM SMOKE DETECTORS are uniquely suited for protecting large, open areas with high ceilings. Plus, they are ideal for providing early warning where temperature extremes (-22°F to 131°F) exceed the capability of other types of smoke detection! Each model is a 4-wire, conventional, single-ended smoke detector. And, the DDPBEAM1224S is equipped with an integral sensitivity test feature that allows the user to quickly and easily meet the annual maintenance and test requirements of NFPA 72®.
Elkhart's 418-L Discharge Adapter

Elkhart's 418-S Discharge Adapter

SHO-ME Utility Work Light w/ Spot Bulb

KOCHEK- 2 1/2" Camlock Female x 3" NH Rigid Male-Aluminum

Cato- Pull Station Cover w/ Pull-Down Cover, Surface Mount

Cato PROTECTIVE COVERS are injection molded of high-density, red polyethylene for optimum impact and tensile strength. Breaker bar models feature a break glass panel and silk-screen messaging. The pull-down model features a molded, 1-piece copolymer cover and silk-screen messaging.
Recessed Sprinkler Wrench

SPRINKLER WRENCHES for Firematic and Globe® sprinklers.
Fire-Lite- Isolator Module

FireLite’s® 300 Series ADDRESSABLE MONITOR & CONTROL MODULES provide an interface to conventional Initiating Device Circuits (IDC) and Notification Appliance Circuits (NAC) respectively. In addition to single circuit modules, FireLite offers addressable, multiple input and output modules to meet a range of applications in which numerous single modules are used. This time-saving design is easy to install. Modules are addressed with easy-to-use rotary code switches. Each circuit has its own address and provisions are included for disabling unused circuits/addresses. Up to 2 multi-modules mount in a DDPBB2F enclosure with built-in chassis; up to 6 multi-modules mount in a DDPBB6F enclosure. They are used exclusively with FireLite's Addressable Fire Alarm Control Panels (FACPs). Since these modules are addressable, they provide the flexibility to meet the requirements of most installations.
Fire-Lite- Addressable Heat Detector

FireLite’s 300 Series low-profile, plug-in ADDRESSABLE SMOKE DETECTORS use a state-of-the-art sensing chamber with communications to provide open area protection. They are used exclusively with FireLite's Addressable Fire Alarm Control Panels (FACPs). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time and reducing property damage. Two LEDs on each sensor will light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (RA400Z).
Fire-Lite- Addressable 135°F Heat Detector w/ Rate-of-Rise

FireLite’s 300 Series low-profile, plug-in ADDRESSABLE SMOKE DETECTORS use a state-of-the-art sensing chamber with communications to provide open area protection. They are used exclusively with FireLite's Addressable Fire Alarm Control Panels (FACPs). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time and reducing property damage. Two LEDs on each sensor will light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (RA400Z).
LED Red Exit w/ Battery Back-Up

FIRESAFETYPLUS.COM's EXIT SIGNS are flame retardant with high impact, thermoplastic housings. Features include a solid-state charger, universal mounting, test button, low voltage disconnect, LED indicator, replaceable pop-out chevrons and 120/277VAC operation. 10-year warranty on LED signs and 5-year warranty on incandescent signs.
LED Red Exit w/ Battery Back-Up, Black

EXIT SIGNS are flame retardant with high impact, thermoplastic housings. Features include a solid-state charger, universal mounting, test button, low voltage disconnect, LED indicator, replaceable pop-out chevrons and 120/277VAC operation. 10-year warranty on LED signs and 5-year warranty on incandescent signs.
SHO-ME Four Function Switch Boxes - Super Duty with Labels

Certified Safety Mfg.'s Unitized First Aid 36 Unit Kits

Elite - Unitized First Aid 36 Unit Kits with Poly White Kit Box
KOCHEK- 4 KOCHEK- 4" Camlock Male x 4" NH Rigid Male-Aluminum

KOCHEK- 3 KOCHEK- 3" Camlock Male x 4" NH Rigid Female-Aluminum

Elkhart's S-320 Running Board Holder

Cato- Pull Station Cover w/ Breaker Bar, Recessed Mount

Cato PROTECTIVE COVERS are injection molded of high-density, red polyethylene for optimum impact and tensile strength. Breaker bar models feature a break glass panel and silk-screen messaging. The pull-down model features a molded, 1-piece copolymer cover and silk-screen messaging.
Gamewell- Door Holder, 24 & 120V, Surface Mount FIRE DOOR HOLDER

The DH Series electromagnetic FIRE DOOR HOLDERS are constructed of the finest materials and workmanship available. The door holder is made of durable die-cast metal finished in high luster double chrome plating. Extremely low current draw saves on power supplies and back-up batteries. Installation is easy using the included adhesive template (included) assures proper alignment without secondary adjustments. Other models that offer alternative voltages and finishes, including brass or dark bronze, are available.
Fire-Lite-Addressable 190°F Heat Detector w/ Rate-of-Rise

FireLite’s 300 Series low-profile, plug-in ADDRESSABLE SMOKE DETECTORS use a state-of-the-art sensing chamber with communications to provide open area protection. They are used exclusively with FireLite's Addressable Fire Alarm Control Panels (FACPs). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time and reducing property damage. Two LEDs on each sensor will light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (RA400Z).
SHO-ME Utility Work Light w/ Flood Bulb

KOCHEK- 2" Camlock Female x 4" NH Rigid Male- Aluminum

Metris TN Laser Thermometer Metris Instruments- Professional Grade Infrared Thermometer

Measures up to 750 degrees!
SHO-ME Alternating Flashing Light Kits - Spot Kit - 2 Lights, Switch, Flasher

SHO-ME Strobe Switch Panels - 2-Outlet Switch

Certified Safety Mfg.'s Unitized First Aid 36 Unit Kits with Metal Kit Box

Construction Kits - Unitized First Aid 36 Unit Kits
Certified Safety Mfg.'s Unitized First Aid 36 Unit Kits with Metal Kit Box

Welders Kit - Unitized First Aid 36 Unit Kits
Certified Safety Mfg.'s Certi-Decon™ Tablets, Decongestant - 1000 pkgs. - 2000 Tablets - Dispenser Box

Certi-Decon™ Tablets, Decongestant - 500mg. Acetaminophen; 5mg. Phenylepherine
Code3 - 2002 Series Strobe Beacon

2 Joule Strobe Beacon with Permanent or Magnetic Mount
Elkhart's A-327A Elk-O-Lite® Female to Male Adapter

Elkhart's A-327 Brass Female to Male Adapter - Chrome

Elkhart's A-327 Brass Female to Male Adapter - Cast Brass

Elkhart's A-327 Brass Female to Male Adapter - Polished Brass

Elkhart's A-327 Brass Female to Male Adapter - Polished Chrome

Cato- Pull Station Cover w/ Breaker Bar, Surface Mount

Cato PROTECTIVE COVERS are injection molded of high-density, red polyethylene for optimum impact and tensile strength. Breaker bar models feature a break glass panel and silk-screen messaging. The pull-down model features a molded, 1-piece copolymer cover and silk-screen messaging.
Brooks -  Red Exit Sign w/ Battery Back-Up Red Exit Sign w/ Battery Back-Up

EXIT SIGNS are flame retardant with high impact, thermoplastic housings. Features include a solid-state charger, universal mounting, test button, low voltage disconnect, LED indicator, replaceable pop-out chevrons and 120/277VAC operation. 10-year warranty on LED signs and 5-year warranty on incandescent signs.
SHO-ME Alternating Flashing Light Kits - Flood Kit - 2 Lights, Switch, Flasher

Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58]
 
shopping carts
Shopping cart powered by MonsterCommerce e-commerce software.